Professional SPF roof installation, coating, and insulation in Inkster, MI. Free inspections. Call today for a no-obligation estimate.
Full-spectrum spray foam solutions for residential and commercial buildings in Inkster, MI.
When your roof is structurally sound but the surface is deteriorating, restoration is the smart investment. We clean, repair, and recoat your entire roof with a warranted system that performs like new at a fraction of replacement cost.
From minor surface patches to full-section refoaming and recoating, our repair crews restore SPF roof performance using materials compatible with your existing system. Every repair is blended seamlessly and warranted.
Commercial roofs deteriorate from the surface down. If your structure and deck are sound, restoration with spray foam and silicone coating is the economically superior choice. We handle buildings from 5,000 to 500,000 square feet.
Active roof leak? We locate the source using advanced detection methods, then repair it permanently at the root cause. No guesswork, no temporary patches — just lasting results backed by our workmanship warranty.
Transform your crawl space from a moisture liability into a conditioned, energy-efficient part of your building envelope. Spray foam eliminates condensation, prevents mold conditions, and dramatically improves floor comfort above.
Elastomeric coatings for standing seam, corrugated, and R-panel metal roofs. We seal rust spots, failing fasteners, open seams, and ridge caps — stopping leaks and adding reflective energy savings in a single application.
Upgrade your attic insulation from fiberglass or cellulose to spray foam and feel the difference the same day. SPF does not settle, sag, or leave gaps — it expands to fill every cavity and seals air leaks that other materials miss.
Ponding water, chronic leaks, and moisture infiltration destroy roofs and building interiors. Our waterproofing systems use closed-cell spray foam and silicone coatings to create an impermeable barrier that handles standing water indefinitely.
Our replacement process is thorough: remove existing roofing to the deck, inspect and repair substrate, apply closed-cell SPF to specified thickness, and finish with a UV-protective coating. The result is a monolithic roof system with no seams to fail.
Stop chasing flat roof leaks with temporary fixes. Our diagnostic approach pinpoints the exact failure point, and our repair methods address the root cause — whether it is failed flashing, membrane damage, or ponding water that needs re-sloping.
New spray polyurethane foam roof installation that creates a seamless, self-adhering membrane with the highest R-value per inch of any roofing system. Energy-efficient, leak-proof, and engineered to last 30 to 50 years with periodic recoating.
High-performance silicone roof coatings that resist ponding water, UV degradation, and extreme temperatures. Unlike acrylics, silicone does not re-emulsify in standing water — making it ideal for flat roofs with drainage challenges.
Emergency storm damage response with tarping, property protection, detailed damage documentation for insurance, and complete roof restoration to pre-storm condition. We work directly with insurance adjusters.
Know the true condition of your roof before problems escalate. Our inspection process covers every component — membrane, flashings, penetrations, drains, and substrate — and delivers a clear, actionable report you can trust.
Protect your roofing investment with a maintenance program designed for your specific roof type. Our crews document every visit with photos and condition ratings so you always know the exact state of your roof.
Serving the growing city of Inkster, MI, Lapolla Industries delivers the same spray foam roofing and insulation technology trusted by commercial and industrial facilities across the nation. Our Inkster crews combine deep SPF expertise with local knowledge of Michigan building codes and climate demands.
Whether you need a spray foam roof on your commercial building, silicone coating on your flat roof, or closed-cell insulation in your attic, Lapolla Industries brings the equipment, materials, and experience to do it right. Every project in Inkster starts with a free inspection and ends with a warranty you can count on.
Here is what sets Lapolla Industries apart from other contractors in Inkster.
No hidden fees, no surprise charges. You receive a detailed written estimate before we start and the final invoice matches — guaranteed. Every line item explained.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
Every project starts with a no-obligation inspection using infrared moisture scanning and visual assessment. We identify every issue and provide an honest, transparent estimate.
Spray foam roofing eliminates tear-off waste, reduces energy consumption, and extends roof life by decades. Our systems help property owners reduce their environmental footprint while saving money.
Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.
Common questions about spray foam roofing and insulation in Inkster, MI.
A properly installed SPF roof in Inkster can last 30 to 50 years with periodic recoating every 10 to 15 years. The closed-cell foam itself does not degrade — only the protective topcoat needs maintenance. Many spray foam roofs installed in the 1970s are still performing today.
If your commercial roof in Inkster is structurally sound but showing surface deterioration — cracked coatings, minor leaks, UV damage — restoration with SPF and a new coating system is likely the better investment. If there is widespread substrate damage, saturated insulation, or structural concerns, full replacement may be necessary. Our inspection will determine which option is right.
Yes. Spray foam applied to crawl space walls and rim joists creates an airtight moisture barrier that eliminates condensation, musty odors, and cold floors. For Inkster homes with persistent crawl space moisture issues, closed-cell foam combined with vapor barrier encapsulation provides a permanent solution.
Yes. Every project in Inkster begins with a no-obligation roof inspection. Our crews assess the condition of your existing roof, identify problem areas using infrared moisture scanning when needed, and provide a detailed estimate with photos and recommendations. There is never a charge for the initial inspection.
Spray foam is one of the best solutions for flat and low-slope roofs in Inkster. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
Closed-cell foam is denser, provides a higher R-value per inch (R-6.5 vs R-3.7), and acts as a vapor and moisture barrier. Open-cell foam is lighter, more flexible, and more affordable. For roofing applications in Inkster we typically recommend closed-cell for its waterproofing properties. For interior wall insulation, either type may be appropriate.
Our reputation is built on results. Here is what our customers say.
"Had our entire warehouse roof restored with a spray-applied coating system. The crew worked around our operations without any disruption. The finished roof reflects heat beautifully and our AC runs less. Win-win."
"Got a comprehensive inspection done on our warehouse roof. They found three areas of trapped moisture that were invisible from the surface. The early detection saved us from much more expensive structural repairs down the road."
"The silicone coating they applied to our metal roof eliminated all the rust spots and sealed every seam and fastener. The reflective finish dropped our cooling costs noticeably. Our building looks ten years newer."
Looking for a spray foam contractor near Inkster? We serve these surrounding areas too.